Starting Current Controlling Device To Prevent Solar UPS over-load Tripping Protection

1 of
Previous Next

Ad Details

  • Ad ID: 615013

  • Added: June 22, 2020

  • Sale Price: ₨1500

  • Condition: Brand New

  • Location: Pakistan

  • State: HYDERABAD


  • Phone: 03233201657

  • Views: 28


It is observed that when appliance such as water pumps or sound amplifier systems etc, are switched on, the Solar Inverter system gets tripped due to over-load . This mostly happens because some appliances consume huge amounts of starting current which is beyond the power capacity of your solar inverter or the generator and as a result tripping problem occurs quite often which is very damaging for the solar or generator system
To over-come the problem this device is specially designed to reduce the extreme starting current of an appliance without compromising its efficiency so that your SOLAR SYSTEMS AND GENERATORS can work flawlessly.
This device not only increases the life span of the solar system or generator but will also increase the working life of other appliances in your home or office because voltage disturbing ripples created by single appliance will badly effect the working of all the other appliances in-side your home or office. For example when ever a water pump is started you will observe flickering of lights, this mainly happens due to high starting current consumed by the motor of the water pump which brings the whole solar or generator system to its limits which may sometime lead to the damaging of internal circuit parts of your solar UPS system or any catastrophic failure of your generator system.
Soon after connecting our device to an appliance that consumes high starting current you will observe that your lights are not flickering when that particular appliance is turned ON, your solar system is not beeping due to overload , your generator is not cranking or vibrating and every thing is working smoothly.

IMPORTANT NOTE: This device will not work with appliances like refrigerators and air-conditioners

Working voltage 185 to 240 volts AC single phase

Model M1 works for appliance b/w power rating of 300 to 600 watts ( or 0.5HP motors or water pumps) Rupees 1500

Model M2 works for 650 to 1000 watts appliances (or 1.0HP motors or water pumps) Rupees 1600

Model M3 is for 1000 to 1500 watts appliance such as 1.5HP motors or water pumps) Rupees 2000